ISI marked Thermal Fogging Machine with HDPE tank-100XHM20

Compatible with all WHO-approved thermal fogging formulations: oil-based pyrethroid insecticide concentrates, fungicides, and approved disinfectants. The High density - HDPE tanks handles all standard formulations without any corrosion or leakage. Always use chemicals approved for thermal fogging — specific water-based concentrates or oil-based carrier formulation are used for thermal application.

Yes. 100X Circle is GeM-registered and MSME/UDYAM certified. Products are listed on the Government e-Marketplace for direct purchase. We provide complete tender documentation: product test certificates, ISO 9001:2015 certificate, GST registration, MSME certificate, technical datasheet, and safety data sheets. Tender enquiries are responded to within 24 hours.

1) Fill chemical tank and fuel tank. 2) Ensure spark sound. 3) Hold start button and pump for 4-5 times until ignition fires. 4) Allow 30–45 seconds warm-up. 5) Open chemical valve slowly to begin fogging. Shutdown: close chemical valve 10-15 seconds prior to shutdown button, hold shutdown button 5–6 seconds for turning off. Release tank pressure.

Operators must wear: full-face respirator or N95 mask, chemical-resistant gloves, protective eyewear, and long-sleeved protective clothing. Do not operate in enclosed spaces without adequate ventilation. Follow chemical manufacturer's PPE guidelines for the specific formulation being used.

Approximately 1.5-1.9 litres of unleaded petrol per hour during continuous operation. The 2.0-litre fuel tank provides approximately 70 minutes runtime. For extended operations, carry spare fuel. Use unleaded petrol with no ethanol as specified in your model's operator manual.

Yes. Thermal fog is widely used for crop protection in paddy, cotton, and vegetable cultivation. Thermal fog penetrates dense canopy — reaching leaf undersides where pests like whitefly and thrips harbour — unlike conventional compression sprayers. Use oil-based insecticide or fungicide formulations approved for thermal application. Apply during early morning or evening when wind is calm.

The battery powers the auto-start ignition only — not continuous operation. Battery life is approximately 100–150 start cycles before replacement is needed. Replacement batteries are easily available.

100X Circle stocks all critical spare parts at our Gurugram facility: nozzle assembly, fuel cap, chemical tank, battery, carburetor set, chemical hose, air filter, pump kit, and ignition components. Standard parts ship pan-India within 3 working days. Emergency same-day dispatch available for orders before 12 PM. Parts availability guaranteed for minimum 5 years from purchase.

Yes — complimentary video training with every purchase. Individual/small-fleet buyers receive video training materials and a operator manual. For bulk orders (5+ machines), on-site training at your facility can be arranged on chargeable basis. Training covers safe start/shutdown, chemical handling, PPE, field maintenance, and basic fault diagnosis.

6 months manufacturer warranty from purchase date. Covers manufacturing defects and material failure under normal operating conditions. Does not cover damage from incorrect chemical use, physical damage, or unauthorised modifications. Warranty claims require original purchase invoice. Claims assessed and resolved within 5 working days.

Yes. Thermal fogging is the WHO-recommended method for adult mosquito control during dengue, malaria, and chikungunya outbreak responses. Use pyrethroid insecticide formulations approved for thermal fogging. Follow National Vector Borne Disease Control Programme (NVBDCP) guidelines for dosage, timing, and operational protocols.

Standard pan-India delivery: 5–7 working days. Bulk government/institutional orders (25+ units): 10–15 working days. Emergency response orders can be expedited — contact us with your requirements. Volume pricing available for 5+ units. Special terms for government procurement through GeM.

After each use: 1) Flush chemical tank with clean water or clean oil. 2) Run the flush through the system for 30 seconds. 3) Close all valves and drain remaining fuel/chemical. 4) Wipe exterior with dry cloth. 5) Disconnect the battery and sparkplug. 6) Store in a dry, ventilated location away from direct sunlight. Full servicing recommended after every 50 hours of operation.